Every man his own horse

The centaur is one of the classical beasts of Greek mythology. In ancient art, they are often depicted as being about the same height as men, but modern art shows them as being much larger than men. Certainly the description of centaurs using tree trunks and boulders as weapons in their battle with the Lapiths points to a larger stature.


The centaur also appears in Sumerian art, though I am unaware of any stories about centaurs in their mythology.


Some of the earliest depictions of centaurs in Greek art showed them as essentially fully human from the front, with the hindquarters of a horse attached to their back.


As a civilized centaur, Chiron is shown wearing a chiton, but the typical barbarous centaur went unclothed.


They are also sometimes portrayed with pointy ears, though not very frequently.

I wasn't sure about the best way to present my centaur miniatures, so I grouped them by manufacturer, and followed up with various size comparison pictures. The horse used in the comparisons is roughly 15 hands high in 1/72 scale.

The first group of centaurs are from the Ral Partha Personalities and Things that go Bump in the Night line. They consist of the Centaur Archer (Ral Partha 01-032) Centaur with Spear v3 and v2 (Ral Partha 01-032) respectively. These are classical centaurs, and scale out to about 14 hands high.


In the next picture are the Armored Centaur (Ral Partha 01-047), and male centaur from the Centaurs (male and female) set (Ral Partha 02-903). The Armored Centaur is a typical modern fantasy centaur, and stands at about 17 hands high. The other centaur is a classical pastoral centaur, standing at 14 hands high.


The final group of Ral Partha centaurs consist of Centaur Adventurers (Ral Partha 02-968), and a Centaur with Sword and Shield (DF-033). All of these centaurs are 14-15 hands high.


The next image is of two Grenadier centaurs - an Armored Centaur (Fantasy Lords 134), and a Female Centaur (Fantasy Lords 064). Both are roughly 17 hands high.


This next pair below, are a Heritage centaur (Fantasy 1328) which stands at 14 hands high, and a Lance and Laser Armored Centaur which stands at 17 hands high.


Below, are three centaurides consisting of Sagittarius (Reaper 03376), Lamia from the Heritage miniatures Manticore and Lamia set (1298), and Lyria Female Centaur (Dark Sword Miniatures 1105). The Reaper centaur is very small at 13 hands, while the Lamia is 16 hands. Both have disproportionately large human torsos. The Dark Sword centaur on the other hand, is almost 20 hands high, and has a disproportionately small human torso.


The next set of images are of Mega Miniatures centaurs formerly produced by Metal Magic. These centaurs stand 16 hands high, and look to be compatible with 25mm or 28mm figures.




A couple of centaurs from Mage Knight appear in the next image. The enormous Centaur Shaman stands 19+ hands high, while the strangely proportioned Centaur Archer is 11 hands high. Its forelegs appear to be twice as long as its hindlegs. It also seems to be wearing leg warmers (?!?!!).


Next are the 15mm centaurs from Eureka, which stand at just over 12.5 hands high.


Two more centaurs from Eureka, and an Irregular centaur standing at 12 hands high.


Comparison between man, horse, and 28mm centaurs:



28mm centaurs just seem too big to use in 1/72 scale fantasy to me. Maybe one or two giant centaurs could exist, but I wouldn't use too many of them.

Comparison between man, horse, and 25mm centaurs:





My preference for use in 1/72 scale fantasy are 25mm centaurs. Averaging at 14-15 hands high, they are large and imposing, but not freakishly large. I like the old Ral Partha centaurs the best, because they have the wild and untamed appearance that I associate with centaurs.

Comparison between man, horse, and 15mm centaurs:


If one were to go by Greek vase paintings, 15mm centaurs would be the best match with 1/72 figures. At 12 hands high, they would be pony sized, but there are sources that say horses during ancient times were typically pony sized (or slightly larger).

28mm+ centaurs

28mm centaurs

25mm galloping centaurs

25mm centaur archers

Various small centaur archers

15mm centaur archers

Rearing centaurs

Pilots & Pin-ups

Recently I've been trying to find pilots for some airplane models that I plan on building in wheels up configuration. The older Airfix and Monogram kits almost always used to come with pilots, but the problem with model planes nowadays is that they never come with pilots. I tried looking around for some pilot figures, but the pickings were pretty slim.


The first pilot is a WWII American Pilot (200MSC01) from Eureka. It is 20mm and seems to scale out close to 1/76. Next in line is a Hobby Master WWII US Pilot (HP0001). It comes in a set of five identical pre-painted figures in soft vinyl. The upper torso seems to match well with the Eureka pilot, but the legs are really short. The next three figures come from the Hobby Master WWII Pilots Set (HP0003), which contains two RAF pilots, two Luftwaffe pilots, and one VVS pilot in soft vinyl. The RAF pilot comes in a particularly wooden pose, but is not to bad as far as scale is concerned. The German and Soviet pilots however, are noticeably smaller than the other pilots, and are probably no more than 1/87 scale. The German pilot has a large head relative to his body, so would probably not look too out of place once he is placed in a cockpit, but the Soviet pilot is particularly poor, with a hollowed out back and a tiny 1/87 head to go with his puny 1/87 body.

Typical of model pilot figures, all of the figures are sculpted in the typical staring-straight-ahead-hands-in-the-lap pose. But really... someone needs to make a decent seated pilot figure. Maybe with his head turned to scan the sky, or giving hand signals to a wingman.

I'm not going to complain too much about the short legs, since this allows figures to fit more easily into a wider variety of cockpits, but using 1/87 figures for 1/72 planes just looks wrong. The only other pilots that I know about are from the Revell Pilots and Ground Crew: German Airforce WWII set, and those come with tiny 1/87 scale pilots as well.

And now, I shift gears and present Pin-Up Gals (PIN1) from Sgt Major Miniatures.


The pin-ups come languorously posed in typical pin-up fashion, but are much larger than the typical 20mm miniature. I would say that at least a couple of them are larger than 1/72, though their size is not so obvious because they are not standing up. The figures are decently sculpted, though I believe that the size of the head is out of proportion to the body. The first gal has the most promise. She looks about the right size, and could be used seated on the wing of a plane, or maybe on the deck of a boat.

Kingdom of the Dwarfs

The characteristics of mythological dwarves are often mixed with those of other mythological races such as elves and trolls. In Norse mythology, the beings called svartálfar (dark elves) are essentially dwarves. They live underground, fashion cunning artifacts, and are generally avaricious. They also bear a resemblance to trolls in that they turn to stone when exposed to sunlight.

Even their size can vary, with ancient images depicting dwarves being the same size as humans. In general though, modern fantasy has set the height of dwarves between 3-4 feet in height. This allows some lines of 15mm dwarves to be used with 1/72 scale figures. Described below, are examples of the various types of dwarves that I currently own.

The first group consists of five plastic dwarves from Caesar, and one from the Age of Mythology game by Eagle Games. The Caesar dwarves are just a tad too tall for my tastes, but they could be used as the taller race of mountain dwarves.



The next set of six images cover the The Shadow Corp/Blood Dawn dwarves sculpted by Rene Perez. They are solid and bulky without being too tall. Of all the dwarves in this entry, I think these are my favorite sculpts.







The next pair of images are of 18mm dwarves from Eureka. They match up very well with the Shadow Corp dwarves, though they seem a bit stiff in comparison.



The next four images are of 15mm dwarves from Black Raven Foundry. These dwarves are are smaller than the Shadow Corp and Eureka dwarves, and much lighter in build, though the height difference is not quite as apparent due to the thickness of their bases.





The next pair of images are of the dwarves produced by East Riding Miniatures. These are true 15mm dwarves with a nice stocky build.



The next images are of dwarven crossbowmen from the Warlords line produced by Grenadier. The bases on these miniatures are very small and uneven so that the figures tend to tip over at the drop of a feather.



Comparison of dwarves blowing horns: Shadow Corp, Eureka x 2, and ERM.



Comparison of dwarven sorcerers: Shadow Corp x 2, and Eureka x 2.



Comparison of dwarven arquebusiers: Caesar, and Shadow Corp x 2.



Comparison of dwarven crossbowmen: Caesar, Shadow Corp, Eureka, Grenadier Warlords, Alternative Armies HOT, and SLM.


Comparison of dwarven axemen: Caesar, Shadow Corp, Eureka, Eagle Games, and SLM. These are the best dwarves for use in 1/72 fantasy. The Caesar dwarves are somewhat too tall for me, and I'm not a big fan of the SLM dwarves sculpted by Bob Olley due to their over-sized heads, but others may have a different opinion.


Comparison of smaller dwarven axemen: BRF, Alternative Armies HOT, Mongoose/Rebel, Alternative Armies TTF, ERM, SLM x 2, and Tin Soldier (I think). These dwarves are either too small, or too slender for me. One possibility is to use them as gnomes instead.