Trolling

The origins of various words and phrases can be very interesting because definitions are affected by usage and can stray from the original intended meaning.

This may occur when people either intentionally or inadvertently misuse a word in a context where it was not originally meant to be used, and the misuse gains traction and eventually becomes popularly accepted as truth — which is how this:

Trolling

Became this:

Trolling

Anyway, enough digression. The subject of this particular post is obviously the troll.

In Norse myth, trolls were closely related to giants (it is even believed that troll is just a negative synonym of jötunn), but the term was also used to describe various smaller mythological beings including huldra.

On to the miniatures (grouped roughly by size and proportions):

The largest trolls in this group are from RAFM, and include a Troll Warrior (Demons of Darkness RAF3723), and an Undead Troll (Demons of Darkness RAF3724).

The next pair is a Giant Troll attacking with Spiked Club (Fiend Factory FF16-1) and a Reaper Marsh Troll (Dark Heaven Legends 02609).

The Marsh Troll was sculpted by Bob Olley, and bears the characteristic facial features of all Olley trolls.

Two more Olley trolls, but this time they are older Ral Partha trolls that stand about 1cm shorter than the newer Reaper sculpt. On the left is one of the Troll Heavy Infantry figures (Fantasy Armies 02-143), while on the right is one of the Troll Rock Throwers (Fantasy Armies 02-142).

Some of these Ral Partha sculpts were used for Mage Knight, and include the Krugg Heaver (Whirlwind #040, #041,#042), Krugg Thug (Whirlwind #037, #038, #039), and the Krugg Headhunter (Minions #082, #083, #084/Nexus #102).

I repainted my figures to eliminate the awful yellow-blue-red colors originally used on them.

The Krugg heaver is one of the Troll Rock Throwers, while the Krugg thug is one of the Fantasy Armies Troll Light Infantry sculpts. The Krugg Headhunter is a modified version of the Fantasy Armies Troll Leader.

I cut off all of the trophies from one of the headhunters because I don't like figures that are covered with skulls or decapitated heads. It is a painstaking process, and will require additional work to make the figure presentable.

I really like these Olley trolls, as they remind me of the Fjeltroll from The Sundering Trilogy by Jacqueline Carey.

Next are a pair of Heritage trolls. The one on the left is a Troll of Moria (Lord of the Rings 1760), while the other one is a regular Troll (Dungeon Dwellers 1246).

A Grenadier War Troll (MM84) and Female Troll (MM86), both from the Monster Manuscript Vol.X box set.

Two Citadel C20 Trolls: Grog Stuntycrusher (left), and Hobol Firebreath (right).

Another Citadel troll (Marauder MM40) and a Reaper Cave Troll (Bones 77004).

Citadel Fantasy Tribe Trolls, sculpted by Tom Meier.

These are the early sculpts, and I believe there were later releases with their "naughty bits" covered up.

Next is a Large Troll with Club (minus the club) from Asgard (Fantasy Monsters FM66), a TSR troll (AD&D Monster Tribes 5305), and a very similarly posed Grenadier troll from the Horrors of the Marsh boxed set (Dragon Lords 2010).

A Ral Partha Troll (AD&D Monsters 11-408), and a pair of Grenadier Trolls (Julie Guthrie 706) are next.

The Ral Partha troll in particular bears the characteristics of the classic troll from the AD&D Monster Manual. The AD&D troll was obviously modeled after the troll from Three Hearts and Three Lions by Poul Anderson (which may in turn have been influenced from elsewhere?).

I also have the Grenadier Denizens of the Swamp troll that is even closer in appearance to the Sutherland illustration from the Monster Manual, but unfortunately it suffered an accident while I was gathering up all my troll miniatures for photography.

More Ral Partha trolls include True Trolls (Personalities and Things that go Bump in the Night 01-063), and a Hill Troll (Personalities and Things that go Bump in the Night 01-010 v2).

Some unconventional trolls are the Archive Bridge Troll (Middle Earth 540), and the Ral Partha Draken (Personalities and Things that go Bump in the Night 01-123).

The figures are kind of similar, and remind me a bit of the Fremont Troll.

More unconventional trolls are the Uz of Glorantha. From left to right are a Trollkin with Spear, Trollkin with Sling, and Dark Troll with Large Axe from the Citadel Trolls and Trollkin box set (Runequest Box 3). The final figure is a Troll Adventurer from the Citadel Adventurers box set (Runequest Box 2).

The Runequest trolls seem a bit undersized for their intended scale, since Uz are supposed to be larger than humans, but they're just about right compared to 1/72 humans. The trollkin are okay, but having even smaller ones would be nice.

Additional candidates for trollkin are cave imps from Splintered Light Miniatures. The following miniatures were purchased as part of the Cave Imp Army (BOX21).

The figures look as if they may have been modeled after the Dam troll, and I'm going to paint them up as such. The product line has been sold to C-P Models, but a boxed set appears to still be sold by Splintered Light. I'm not sure if they actually come in a box though, since I received my figures in a single ziploc bag.

Last are my 15mm trolls, with figures from Chariot (GOB10) and Alternative Armies (HOT3) on the left, while to the right is a Splintered Light Troll Throwing Rock (ORC04) and a 25mm Heritage River Troll (Fantasy 1315).

These smaller trolls would be ideal for a low fantasy game in which monsters are not of gigantic proportions.

The Heritage troll is a 25mm figure, but it is barely taller than the SLM troll. The Chariot figure looks like a typical Warhammer troll, while the HOT troll would fit well stylistically with the Olley trolls (while still being unique). I just wish there was a 25mm version of the HOT figure so that it really could be used alongside the Olley trolls.

A nasty-looking troll, brandishing a bloody axe,
blocks all passages out of the room.

Shake Your Tail Feather

Cursed for a transgression that is lost to time, the Durulz race has been described as humans cursed with duck-like features, or ducks cursed with intelligence and the loss of flight. Ducks are one of the signature races of Glorantha and of the RuneQuest game, and despite the persistent attitude that they are ridiculous, I rather like them.

Even though they are a rather obscure race, many manufacturers have made anthropomorphic ducks for gaming. Below are some of the miniatures that are part of my collection. From left to right, they are the Citadel Duck Adventurer from the Non Human Adventurers boxed set; a Ral Partha Duck Adventurer from the Non-Human Adventurers blister (18-014); A Chariot Duck with Sword (QAK2), and Young Egg Guard with Sling (QAK4), both from Magister Militum.



All of these ducks are suitable as Durulz in 1/72, even though the Chariot ducks are marketed as 15mm figures. Frankly, the egg guard are the only ones that I think would be suited for 15mm gaming, as the other ducks would be fairly close in size to many 15mm humans.

The Deer Tribe

I've always thought that the film Mononoke Hime by Hayao Miyazaki had great potential for wargaming, and have been trying to assemble miniatures representing the various characters in the film for quite some time. This entry will be the first of three entries covering the Forest Gods.


The main Forest God is the Shishigami(シシ神) or Deer God. There are several large scale statues of the Deer God, but luckily I was able to find one that looks the right size for use with 1/72 figures.


I've included the red elk, Yakul here as well, because it is a member of the deer family. There are a couple of miniatures that can be used as proxies with a little modification. Red elks have appeared in an earlier work by Miyazaki as well.


The Journey of Shuna (シュナの旅) is considered a precursor to Miyazaki's epic Nausicaa, and includes many designs that appear in his later works. I'm surprised that it has not been published in English yet, but then I guess many people would consider it too Old School.


On to the miniatures. The first figure is the Deer God, which I received with a bunch of Studio Ghibli merchandise, mentioned in an entry I posted back in May. It used to be part of a cell phone strap, but since it seemed exactly the right size for 1/72, I cut it off to use for gaming. The hole that ran through the center was filled in, and painted over.


The next two miniatures will serve as the basis for my red elk conversions. The first figure is a Gemsbok from the Ral Partha Veldt Animals set (31-032). The body is about the right size for what I want, but the neck seems a bit short, and the horns are different. The next miniature is a Psychotic Goat Llama (Chariot S20X1) from Magister Militum. This miniatures comes with tack, so is not as useful as the Gemsbok. It's legs are also too short, though this can be remedied. The best part of the Goat Llama however are the horns, which look spot on for red elk horns.

Bein' Green

The following miniatures are a small group of frogs and toads I have assembled for gaming purposes.

The first two pictures are of frog folk from East Riding Miniatures. The first three figures below, are from the Frogfolk Command (FT65), followed by the two poses from Frogfolk with Swords (FT69), one pose from Frogfolk with Spears (FT68), and two poses from Frogfolk Ambushers (FT70).


The next picture shows one pose from Frogfolk with Blowpipes (FT67), and the two poses of Frogfolk Archers (FT66).


I really like this range of frogs from ERM. They are currently the only 15mm fantasy frog people in production. However, Eureka is halfway to producing some of their 28mm Warrior Frog line in 15mm through the 300 Club, and I understand that SLM will also be releasing frog people next year.

For normal frogs which can double as familiars, Chariot has a Plague of Frogs (CFB02) in 15mm consisting of ~20 frogs on circular bases. Irregular produces Kermit the Barbarian (CR27) on a square base, as part of their 6mm fantasy line. The third miniature below is a Ral Partha toad from their Familiars set (02-958), followed by Reaper's toad familiar from their Familiar Pack III (02593). These toads are rather large, and the Reaper toad in particular would be good cane toad in 1/72.


Next are the giant frogs: The first is the Giant Frog from Citadel (FF56), followed by three different poses from Black Tree Design's Frog Swarm (FA0822).



Even larger giant frogs and toads follow. The first two miniatures below are toad mounts from Eureka's Warrior Frog Cavalry (100FRG26). There are six different variants made up by combining three different types of body with two different sets of legs. The bodies are made of a gray resin, while the legs are made of metal. One of the frogs also comes with an extended tongue made of metal. The final Giant Frog (M134) is from BTD. It is a two part figure, with separately molded front legs. The feet of an unfortunate victim protrude from it's mouth, but I think I will be removing them.

Happy Halloween!

For Halloween, I decided to cover some of the typical creatures we associate with this celebration - witches, skeletons, werewolves, mummies, and vampires.

Witches

The first group of miniatures are 15mm witches from Chariot (MM01). There is one standing pose and two sitting poses with traditional pointy hats and long robes. The set comes with a shallow cauldron with separate legs. These miniatures are true 15mm figures, so will most likely be used as donors for future witchy projects.



Skeletons

Representing skeletons, we have the Skeleton Recruiting Party from GFI (25980006). This set consists of a number of miniatures from the old Minifigs Valley of the Four Winds line. Shown below is the Dead Cart (VFW42) and the Coffin, Plain with Skeleton (VFWM4).


The rest of the recruiting party consists of a Skeleton with Lantern (VFW120), a Skeleton Carrying Wine barrel (VFW118), and a Skeleton Carrying Basket of Skulls (VFW119).



These are true 25mm figures, and full of character to boot. Except for their enormous heads, they are quite compatible with 1/72 figures. Next to the three GFI skeletons is an old Citadel Skeleton Warrior (FF52-1). He is a bit bulky, but also compatible with 1/72 with the exception of his huge head. Some unfortunate 15mm skeletons will have to donate their heads to make these guys suitable for my Army of the Dead. At the end is a plastic Caesar skeleton for comparison.

It is my hope that one day, GFI will re-release all of the classic Minifigs skeletons, particularly the Great Bell and Tower that they use as a teaser for their pre-order thumbnail.

Werewolves


There are a number of different werewolf types, which could be characterized along a continuum of increasingly wolf-like features. There is the old horror movie wolfman à la Lon Chaney Jr.; the man-wolves of The Howling; the werewolf in An American Werewolf in London; and finally, the man-transformed-to-actual-wolf of mythology.

The first werewolf figure shown above is from Citadel (FF19). It has characteristics of both wolfman and man-wolf. It actually reminds me a bit of the big burly bear-wolves from the old Werewolf TV show. The next werewolf is from Ral Partha (ES61). It too has hybrid features, but it has the lean look that I associate with werewolves. After, is a 20mm werewolf from Elhiem (P28), followed by three 15mm Wolfen: the Wolfen Berserker (W006), Wolfen Shaman (W010), and Wolfen Spearman (W002). Though Wolfen are not proper werewolves, the Elhiem werewolf is clearly undersized, being no taller than the 15mm Wolfen.

For me, werewolves should be tall, like Miss Lupescu of the Graveyard Book, or the Lycans of Underworld. Other than the Ral Partha werewolf, I'm not sure there are any other miniatures that meet my criteria.

Mummies


Most of the mummies shown above are of the old school Hammer Films style mummy. The first mummy is from the Grenadier Monsters boxed set (5002), followed by one by Ral Partha (ES20). These mummies are large and bulky. Totally unsuitable for 1/72 despite the preponderance of tall mummies in this scale. Next is version 1 of the Citadel Mummy (FF60). I believe that version 2 is identical to the Ral Partha version. I find this Citadel version superior to the Ral Partha version, though like most 25mm figures, the head is too big for 1/72. Next is the Elhiem Mummy (P28) which is slightly short, but fine. The last bunch are from Chariot (SHE06), which are tiny at 15mm.

Vampires


Vampires round out this entry, with The Count and Countess from Elhiem (P27), and a line up of Elhiem Vamps (P33). I'm not sure why The Count is so short, since he is obviously based off of the Bela Lugosi version of Dracula rather than Tom Cruise's Lestat. After all, Lugosi was supposed to have been 6' 1".

A comparison of 1/72 vampires and mummies in plastic and metal.